| Length: |
250 – 2500 mm (edge glued) |
| |
250 – 4500 mm (finger jointed) |
Width: |
120 - 1000 mm |
| Thickness: |
12 – 43 mm (edge-glued panels) |
| |
14 – 43 mm (finger-jointed panels) |
| |
>43 mm (special products) |
| Wood moisture: |
8 – 10 % |
| Glue: |
D3 (moisture proof), or |
| |
D4 (waterproof) durability class |
| Sanding: |
grain 80 – 150 possible |
| |
|
Walnut (steamed): finger jointed (A/B)
WALNUT (steamed) – finger-jointed, A/B quality:
A-side:
- lamellas (staves) matched by wood structure (the same grain pattern on the whole side of the panel)
- lamellas (staves) matched by the colour (but since the walnut is a very colourfull wood specie, some colour differences are still allowed);
- little sound pin knots, that are not going through to the opposite side, are allowed (up to max. 5 mm in diameter; 1 knot/m 2 allowed);
- without wood cracks, end splits, rot, wormholes or other defects (natural or developed by bad drying);
- no technical defects allowed
B-side:
- lamellas (staves) matched by wood structure (the same grain pattern on the whole side of the panel);
- light discoloration allowed;
- little sound knots, that are not going through to the opposite side, are allowed (up to max. 5 mm in diameter; 3 knots/m 2 allowed);
- without wood cracks, end splits, rot, wormholes or other defects (natural or developed by bad drying);
- no technical defects allowed
|
